4000 * beads in 20 colors
1200 * transparent beads in 6 colors
300 * diamond beads in 3 colors
(Total 5500 beads)
24 * design cards
2 * big bracelet
2* small bracelet
2 set * gyro component
4 * base
8 * cartoon template
1 * spray bottle
1 * ballpoint pen
1 * instructions book
1 * shovel
1 * tweezers
1 * hexagon template
1 * square template
5 * plastic buckle
5 * metal key ring
5 * metal pen ring
5 * sling
Steps for usage
1. Make a pattern: DIY yourself or place the beads in the groove of the template according to the pattern on the card.
2. Water spray: fill the water spray bottle with water and spray water on the work.
3. Wait: Set the sprayed piece aside and wait for 60 minutes (if you are in a hurry, you can put it in the sun or use a hair dryer to speed up the fixing)
4. Finish: After waiting for the work to dry, carefully remove the pattern with a shovel. You can also put a hanging ring in the gap, so a beautiful ornament is completed!
1. When spraying water, spray enough water on each part of the pattern fully and completely.
2. Wait about one minute after spraying water, and put the template upright to let the excess water flow down. After that, wait 60 minutes for the pattern to dry completely (lower temperature will increase the natural drying time).
3. Wait for the work to dry completely before removing it with tools or hands.
4. If the beads are not completely stuck together, you can re-spray water on the back, and it will be stronger after drying.
5. If the finished pattern will warp up, please put a heavy object such as a book on it, and then it will be flat.
6. If there are marks on the back of the pattern, spray water on the back again and wait for it to dry.
|Manufacturer recommended age||3 year and up|
|Package Dimensions||34.5x 21.5x 4 cm|
|Item Weight||300 Gramm|